Data Recorders form the core solution in the Real Time Integrated Systems [RTIS] portfolio offered by Symmetric. We provide two types of Data Recorders - Ground-based Data Recorder and Airborne Data Recorder (by application) and Analog and Digital (by classification) with a choice of varied IO modules suiting a wide range of applications. Data Recorder solutions offered includes integrated Controller and Timing Hardware, I/O interfaces, Storage and Customized software that records and replays different types of data and also provides data analysis and custom implementations like filtering of the recorded data.
Our Specialization is in providing custom configured and integrated field proven COTS Ground based and Airborne Recorders as independent Job-orders.
The Model STR-2001 is a 19" rack mountable multi-purpose COTS recorder integrated for ground applications. The STR-2001 is a high speed, 4-channel sFPDP Fibre / Multi channel Gigabit / 10 Gigabit Ethernetrecorder variant capable of sustained throughput rates of up to 320 Mbytes/sec or more. The recorder also can be provided with a wide array of other I/O options for recording including digital and analog I/O with a capacity of 8/12/24 TB or larger capacity, removable and hot swappable SSD/ Rotating HDD Recording Module with / without RAID 0/5/10. The STR-2001 is designed to accept Alphi's I/O boards as well as third party COTS boards. The modular design allows the user to custom integrate the recorder for any mission requirement by reconfiguring the removable boards, adding and or subtracting channels as needed.
![]() Rear |
SYSTEM ORIENTATION |
![]() Front |
PHYSICAL SPECIFICATIONSRecorder Size: 19" W x 4U H x 13.18" L (excluding connectors and handles) Storage: 2.5-inch SATAIII SLC SSD 1 TB Storage capacity configured; SSD – SLC / MLC and Rotating HDD options available[expandable up to 24TB+] Recording Format: IRIG 106 Chapter 10 packet format GBE: 4/8 or more 1 GBps inputs 1 4/8 Channels of 10GbE inputs 10/100/1000Base-T Ethernet Interface for control UDP/IP, Minimum 4 ports support, Support for Multicast & broadcast protocol Input/output: sFPDP and GbE Inputs available. Can be extended to any combination of Analog Standard Definition Video w/ Audio, Digital High Definition (SDI) Video w/ Audio, MIL-STD-1553, PCM, or ARINC Processor: Intel® Core™ i7, Quad-Core Processor sFPDP Fiber Input: 4 channels Transmitter and Receiver Single-Mode Optical, LC Connectors Transceiver modules with 1310 nm wavelength Data rate support for 1.0625, 2.125, 2.5, and 3.125 Gbps per channel Onboard DRAM capacity of 512MB connected to FGPA Recorder Weight: 22 pounds, varies by configuration SYSTEM ORIENTATIONTemperature: 0°C to +50°C (operational) -40°C to +70°C (storage) Cooling: Airflow – Front to Rear Power: 200W – 350W PSU Protection: EMC shielding level 1 HDD / SSD - SLC/MLC Drive Options
![]() |
||
Ordering Information |
||
STR 2001-S
Ground Station Data Recorder with SFPDP Modules
STR 2001-G
Ground Station Data Recorder with GBE Modules
STR 2001-SG
Ground Station Data Recorder with SFPDP and GBE Modules
|
The Model STR-2002 is predominantly an analog data recorder with Wideband Analog Recording and Replay capability. This is a 19" rack-mountable multi-purpose recorder designed for ground applications. A MIL / Rugged variant is also available. The STR-2002 is capable of Recording 2 channels IF data at 70 MHz ± 20 MHz, 4 channels simultaneous single-ended analog input from 25MS/s to 6GS/s or more per channel with IRIG-B Input in a typical configuration. The Recorder also offers a wide array of other I/O options for recording with a capacity of 10TB HDD Memory Module typically (expandable up to 32TB or more) with / without RAID 0/5/10. The STR-2002 is designed to accept Alphi'sI/O boards as well as third party boards.
![]() Rear |
SYSTEM ORIENTATION: |
![]() Front |
PHYSICAL SPECIFICATIONSRecorder Size: 19" W x 4U H x 13.18" L (excluding connectors and handles) Processor: Intel® Core™ i7, Quad-Core Processor Recording Format: IRIG 106 Chapter 10 packet format IF Input: 2x Channels 14 / 16-bit A/Ds Full Scale Input of +10dBm into 50 ohms 3 dB Passband: 300 kHz to 700 MHz or more Sampling Rate: 10 MHz to 6GHz or more Output IF: DC to 400 MHz or more Output Sampling Rate: 800 MHz or more Resolution: 14 / 16 bits Full Scale Output: +4 to +10 dBm into 50 ohms Analog 4/ 8x Channels of Single Ended Analog Input/output : Recording, at 25MS/s to 6GS/s per channel, Supports up to 10V Peak to Peak Input Level, AC/DC Coupling Selectable, Input Impedance 50 Ω or 1 MΩ Recorder Weight: 28 pounds, varies by configuration ENVIRONMENTAL SPECIFICATIONSTemperature: 0°C to +50°C (operational) -40°C to +70°C (storage) Relative Humidity: 0 to 95%, non-cond. Power: 200W – 350W PSU STORAGE OPTIONS
RAID SOFTWARE FEATURES
|
||
Ordering Information |
||
STR 2002-I
Ground Station Data Recorder with IF Recording Modules
STR 2002-AI
Ground Station Data Recorder with IF and Analog Recording Modules
STR 2002-A
Ground Station Data Recorder with Analog Recording Modules
STR 2002-X
Ground Station Data Recorder with User Defined Configuration (Please consult us for the finalization of the spec)
|
The Model STR-2003 is a 19" rack mountable multi-purpose recorder designed for ground applications. The STR-2003 is capable of recording and replay of 4 channels simultaneous single-ended analog input with recording of 50 MS/s or more per channel, 2 channels Video and Audio. The recorder also offers a wide array of other I/O options for recording and replay: MIL-STD-1553, ARINC 429, UART and up to 10Gig Ethernet, with a capacity of 2TB Memory Module or more with / without RAID 0/5/10. The STR-2003 is designed to accept Alphi's I/O boards as well as third party boards.
![]() Rear |
SYSTEM ORIENTATION: |
![]() Front |
PHYSICAL SPECIFICATIONSRecorder Size: 19" 4U Rack Mountable System Processor: Intel® Core™ i7, Quad-Core Processor Recording Format: IRIG 106 Chapter 10 packet format IF Input: 2x Channels 14 / 16-bit A/Ds Full Scale Input of +10dBm into 50 ohms 3 dB Passband: 300 kHz to 700 MHz or more Sampling Rate: 10 MHz to 6GHz or more Output IF: DC to 400 MHz or more Output Sampling Rate: 800 MHz or more Resolution: 14 / 16 bits Full Scale Output: +4 to +10 dBm into 50 ohms Analog 4/ 8x Channels of Single Ended Analog Input/output : Recording, at 25MS/s to 6GS/s per channel, Supports up to 10V Peak to Peak Input Level, AC/DC Coupling Selectable, Input Impedance 50 Ω or 1 MΩ Recorder Weight: 28 pounds, varies by configuration ENVIRONMENTAL SPECIFICATIONSTemperature: 0°C to +50°C (operational) -40°C to +70°C (storage) Relative Humidity: 0 to 95%, non-cond. Power: 200W – 350W PSU STORAGE OPTIONS
RAID SOFTWARE FEATURES
|
||
Ordering Information |
||
STR 2002-I
Ground Station Data Recorder with IF Recording Modules
STR 2002-AI
Ground Station Data Recorder with IF and Analog Recording Modules
STR 2002-A
Ground Station Data Recorder with Analog Recording Modules
STR 2002-X
Ground Station Data Recorder with User Defined Configuration (Please consult us for the finalization of the spec)
|
The Model STR-2004 is a 19" rack mountable multi-purpose recorder designed for ground applications. The STR-2004 is capable of recording 4 channels simultaneous single-ended analog input, 50 MS/s or more per channel, 4 Channels of PCM Input with up to 32Mbps per channel, 4 Channels of MIL-STD-1553 and Video Recording. The Recorder also offers a wide array of other I/O options for recording: HD video, ARINC 429, PCM, Wideband Analog, UART, Pulse and up to 10Gig Ethernet, with a capacity of to 2TB Memory Module or more with / without RAID 0/5/10. The STR-2004 is designed to accept Alphi's I/O boards as well as third party boards.
![]() Rear |
SYSTEM ORIENTATION: |
![]() Front |
PHYSICAL SPECIFICATIONSRecorder Size: 19" 4U Rack Mountable System IRIG 106 Chapter 10 packet format Analog I/O: 2 or 4 channels simultaneous single-ended Baseband analog input, 50 MS/s or more per channel; 14-bits Input Range (±0.2V, ±1V) or (±1V, ±5V) software selectable; Input Impedance 50Ω, 75 Ω or 1 KΩ software selectable; 10 MHz or more analog input bandwidth; AC or DC Coupling options Video / Audio 2 channels, video, audio or both, NTSC or PAL, MPEG2 or MPEG4 MIL STD 1553: 4 dual redundant MIL-STD-1553B buses; Transformer coupled Electrical Interface; Complete bus with time stamping for all messages recording method ARINC 429: 8/16 number of Channels 12.5 Kbps (Low speed mode) selectable/auto bit rate 100 Kbps (high speed mode) selectable/auto bit rate Time stamping for all messages ARINC 717 : One Receive ARINC717 channel Operates from a single +3.3V supply; Selectable Harvard Bi-Phase (HBP) or Bi-Polar Return-to-Zero (BPRZ) receive channel; One selectable receive channel as HBP or BPRZ with integrated analog line receiver; 32-word by 12-bit FIFOs for receive channel AFDX: Two IEEE 802.3u (100BaseTX) standard compatible Ethernet interfaces; Single dual redundant A664P7 compatible interface; Filters redundant frames received within a 5ms window on the two A664P7 links; outputs exact copies of the non-redundant frames on the two output Ethernet interfaces; Valid frame counters, error frame counters, and discarded redundant frame counters; Supports up to 512 virtual links; Fixed latency through module Other Options: 3 x hot-swappable 3.5" HDD tray/carrier with SATA2 Drive Interface Weight: 50 pounds, *varies by configuration ENVIRONMENTAL SPECIFICATIONSTemperature: 0°C to +50°C (operational) -20°C to +70°C (storage) Relative Humidity: 0 to 95%, non-cond. Single or redundant 600-800W 110/220 Volt AC. Other power options Power: available STORAGE OPTIONS
SOFTWARE FEATURES
|
||
Ordering Information |
||
STR 2004-AP
Ground Station Data Recorder with ADC, PAL/NTSC Video Recording Modules
STR 2004-P1
Ground Station Data Recorder with PAL/NTSC Video,1553 Recording Modules
STR 2004-1A
Ground Station Data Recorder with 1553, ADC Recording Modules
STR 2004-AP1
Ground Station Data Recorder with ADC, PAL/NTSC Video, 1553 Recording Modules
|
The Model STR-2005 is a 19" rack-mountable multi-purpose recorder designed for ground applications. The STR-2005 is a high speed Analog [3GS/s to 6GS/s or more] Recorder capable of sustained throughput rates of up to 3.6GB/sec to external RAID array. The Recorder also offers a wide array of other I/O options for recording: HD video, Standard video, MIL-STD-1553, ARINC 429, PCM, Wideband Analog, UART, Pulse and up to 10Gig Ethernet, with a capacity of 24TB or more SSD/HDD Memory Module with / without RAID 0/5/10. The STR-2005 is designed to accept Alphi's I/O boards as well as third party boards. The design allows the user to custom design the recorder for any mission requirement by reconfiguring the removable boards, adding and or subtracting channels as needed.
![]() Rear |
ORIENTATION: SYSTEM |
![]() Front |
PHYSICAL SPECIFICATIONSRecorder Size:
19" W x 4U H x 13.18"L (excluding connectors and handles)
2.5-inch SATAIII SSD Analog Input: 4/ 8x Channels of Single Ended Analog Recording, at 3GS/s to 6GS/s per channel, Supports up to 10V Peak to Peak Input Level, AC/DC Coupling Selectable, Input Impedance 50 Ω or 1 MΩ Other Input/output: Can be extended to any combination of Analog Standard Definition Video w/ Audio, Digital High Definition (SDI) Video w/ Audio, MIL-STD-1553, PCM, or ARINC Processor: Intel® Core™ i7, Quad-Core Processor High speed Analog Input: 2x Channels of Analog Recording, up to 3G/s per channel with 12-bit resolution Recorder Weight: 22 pounds, varies by configuration ENVIRONMENTAL SPECIFICATIONSTemperature: 0°C to +50°C (operational) -20°C to +70°C (storage) Relative Humidity: 0 to 95%, non-cond. Single or redundant 600-800W 110/220 Volt AC. Other power options Power: Available STORAGE OPTIONS
SOFTWARE FEATURES
|
||
Ordering Information |
||
STR 2005-WM (4/8)
Ground Station Data Recorder with ADC, Built-in Display
STR 2005-WOM (4/8)
Ground Station Data Recorder with ADC, without Built-in Display
STR 2005-X
Ground Station Data Recorder with User Defined Configuration (Please consult us for the finalization of the spec) |
The Model STR-2006 is a 19" rack mountable multi-purpose recorder designed for ground applications. The STR-2006 is a high speed LVDS Recorder capable of recording up to 20Gbps per channel with sustained throughput rates of up to 3.6GB/sec to external RAID array. The Recorder also offers a wide array of other I/O options for recording. viz., High Speed LVDS, HD video, Standard video, MIL-STD-1553, ARINC 429, PCM, Wideband Analog, UART, Pulse and up to 10GigE Ethernet, with a capacity of 24TB or more SSD/HDD Memory Module with / without RAID 0/5/10. The STR-2006 is designed to accept Alphi's I/O boards as well as third party boards. The design allows the user to custom design the recorder for any mission requirement by reconfiguring the removable boards, adding and or subtracting channels as needed.
![]() Rear |
![]() Front |
|
PHYSICAL SPECIFICATIONSRecorder Size:
19" W x 4U H x 13.18"L (excluding connectors and handles)
2.5-inch SATAIII SSD Input/output: High Speed Inputs available up to 20Gbps per channel. Can be extended to any combination of LVDS, LSTTL, LVPECL etc. Processor: Intel® Core™ i7, Quad-Core Processor High speed LVDS Input: High speed LVDS Recording ,32 bits of LVDS digital I/O, One LVDS clock, One LVDS data valid, One LVDS data suspend, PCI Express Interface, Up to 2 GB of DDR3 SDRAM, Recorder Weight: 22 pounds, varies by configuration ENVIRONMENTAL SPECIFICATIONSTemperature: 0°C to +50°C (operational) -20°C to +70°C (storage) Relative Humidity: 0 to 95%, non-cond. Single or redundant 600-800W 110/220 Volt AC. Other power options Power: Available STORAGE OPTIONS
SOFTWARE FEATURES
|
||
Ordering Information |
||
STR 2006-WM (4/8)
Ground Station Data Recorder with LVDS 4/8 channels, with Built-in Display
STR 2006-WOM (4/8)
Ground Station Data Recorder with LVDS 4/8 channels, without Built-in Display Monitor
STR 2006-X
Ground Station Data Recorder with user Defined Configuration (Please consult us for the finalization of the spec) |
The STR-2007 Recorder caters for recording sensor data inputs from various sensors which are signal conditioned to high levels and is ideal for instrumentation applications. The recorder features high-end low-noise analog recording modules with a very high input resolution of 16/24-bit. Each analog input channel is equipped with its own dedicated Sigma-Delta A/D converter for sample rates of 200KSamples/s/channel or higher rates. The signal-to-noise ratio is up to 93dB.
![]() Without Display: For High Channel Density Count |
![]() With Display: For Compact, Low Channel Density |
|
PHYSICAL SPECIFICATIONSRecorder Size: 19" W x 4U H x 13.18"L (excluding connectors and handles) 2.5-inch SATAIII SSD 2TB Storage capacity configured; Storage: SSD / HDD options available [expandable up to 10TB] High Speed Inputs available density of 8-32 channels, expandable up to 256 or more channels, Sigma-Delta A/D converter per channel, Integrated 16/24 bit digitizer modules, 200KSPS maximum A / D sampling frequency. Input Range: Software input voltage ranges of ±10V, ±5V, ±2.5V, Signal to Noise and Distortion Ratio of up to 93dB. Processor: Intel® Core™ i7, Quad-Core Processor ENVIRONMENTAL SPECIFICATIONSTemperature: 0°C to +50°C (operational) -20°C to +70°C (storage) Relative Humidity: 0 to 95%, non-cond. Single or redundant 600-800W Power: 110/220 Volt AC. Other power Options are available. STORAGE OPTIONS
|
||
Ordering Information |
||
STR 2007-M
WM (With Integrated Display) / WOM (Without Integrated Display)
STR 2006-OPT (4/8)
0/1: 0 - 16 bit ADC, 1 - 24 bit ADC
STR 2007-CH
8/16/32/64/128 /256: Number of channels selection
|
The Model AMDR-2001 is a multi-purpose recorder designed for airborne applications. The recorder features a high speed, 4-channel sFPDP Fibre interface capable of sustained throughput rates of up to 320 Mbytes/sec or more to the onboard storage. The recorder also offers a wide array of other I/O options for recording with a capacity of 1/2/8TB SSD Memory Module. The AMDR-2001 is designed to accept Alphi's I/O boards as well as third party boards. The design allows the user to custom design the recorder for any mission requirement by reconfiguring the removable boards, adding and or subtracting channels as needed.
![]() Without Display: For High Channel Density Count |
SYSTEM CONFIGURATION |
![]() With Display: For Compact, Low Channel Density |
PHYSICAL SPECIFICATIONSRecorder Size: 8.90 in. (L) x 4.88 in. (W) x 3.61 in. (H) Storage: 2.5-inch SATAIII SSD 1 TB Storage capacity configured; [expandable] GBE: 4/8 or more 1 GBps inputs 4/8 Channels of 10GbE inputs 10/100/1000Base-T Ethernet Interface for control UDP/IP, Minimum 4 ports support, Support for Multicast & broadcast Recording Format: IRIG 106 Chapter 10 packet format Processor: Intel® Core™ i7, Quad-Core Processor Input/output: sFPDP and GbE Inputs available. Can be extended to any combination of Analog Standard Definition Video w/ Audio, Digital High Definition (SDI) Video w/ Audio, MIL-STD-1553, PCM, ARINC429 or 10GbE sFPDP Fiber Input: 4 channels Transmitter and Receiver Single-Mode Optical, Transceiver modules with 1310 nm wavelength (other options available) Data rate support for 1.0625, 2.125, 2.5, and 3.125 Gbps per channel Onboard DRAM capacity of 512MB connected to FGPA sFPDP Connector: LC connector, MIL-DTL-38999 Glenair or Molex [Bulkhead for IO on Chassis is MIL-DTL-38999 Glenair or Molex] Recorder Weight: Approx. 21.55 lbs, varies by configuration ENVIRONMENTAL SPECIFICATIONSTemperature: -20°C to +75°C (operational) -40°C to +80°C (storage) 5%-95% relative humidity with Humidity: condensation Vibration: As per MIL-STD-810F Salt Fog: As per MIL-STD-810F EMI/EMC: MIL-STD-461F SSD - SLC/MLC Drive Options
|
||
Ordering Information |
||
AMDR 2001-S
Airborne Data Recorder with SFPDP Modules
AMDR 2001-G
Airborne Data Recorder with GBE Modules
AMDR 2001-SG
Airborne Data Recorder with SFPDP and GBE Modules
|
The Model AMDR-2002 is a revised version of Model AMDR-2001, with an major addition of Analog I/O recording capability for airborne applications. The AMDR-2002 is capable of recording 2 channels IF data at 70 MHz ± 20 MHz, 8-channel Digital PCM data from 100 bps to 40 Mbps and 4 channels simultaneous single-ended analog input of 80 MS/s per channel or more with IRIG-B Input. The recorder also offers a wide array of other I/O options for recording with a capacity of 2TB HDD Memory Module (expandable to 8TB or more). The AMDR-2002 is designed to accept Alphi'sI/O boards as well as third party boards.
![]() Without Display: For High Channel Density Count |
SYSTEM CONFIGURATION |
![]() With Display: For Compact, Low Channel Density |
PHYSICAL SPECIFICATIONSRecorder Size: 8.90 in. (L) x 4.88 in. (W) x 3.61 in. (H) Processor: Intel® Core™ i7, Quad-Core Processor Storage: IRIG 106 Chapter 10 packet format Recording Format: IRIG 106 Chapter 10 packet format PCM Input/output : 8x Channels of PCM/UART/PULSE Recording, upto 40Mbps Input/Output Single ended, TTL (0 - 5V or ±5V ) NRZ-L/M/ S, Bi-phase-L/M/ S Input Impedance: 120Ω RS422, 75Ω IF Input 2x Channels 14 / 16-bit A/Ds Full Scale Input of +10dBm into 50 ohms 3 dB Passband: 300 kHz to 700 MHz or more Sampling Rate: 10 MHz to 6GHz or more Output IF: DC to 400 MHz or more Output Sampling Rate: 800 MHz or more Resolution: 14 / 16 bits Full Scale Output: +4 to +10 dBm into 50 ohms Recorder Weight: Approx. 21.55 lbs, *varies by configuration sFPDP Connector: LC connector, MIL-DTL-38999 Glenair or Molex [Bulkhead for IO on Chassis is MIL-DTL-38999 Glenair or Molex] Recorder Weight: Approx. 21.55 lbs, varies by configuration ENVIRONMENTAL SPECIFICATIONSTemperature: -20°C to +75°C (operational) -40°C to +80°C (storage) Relative Humidity: 0 to 95%, with condensation Vibration: As per MIL-STD-810F Salt Fog: As per MIL-STD-810F EMI/EMC: MIL-STD-461F SSD - SLC/MLC Drive Options
SOFTWARE FEATURES
|
||
Ordering Information |
||
AMDR 2002-IP
Airborne Data Recorder with IF and PCM Recording Modules
AMDR 2002-AI
Airborne Data Recorder with IF and Analog Recording Modules
AMDR 2002-AP
Airborne Data Recorder with PCM and Analog Recording Modules
AAMDR 2002-IPA
Airborne Data Recorder with IF, PCM and Analog Recording Modules
|
The Model AMDR-2003 is a multi-purpose recorder designed for airborne applications. The AMDR-2003 is capable of recording 4 channels simultaneous single-ended analog input up to 50 MS/s per channel, 4 Channels of PCM Input with up to 32Mbps per channel, 4 channels of RS422 / RS232 and 2 channels of Video recording. The recorder also offers a wide array of other I/O options for recording: HD video, MIL-STD-1553, sFPDP, ARINC 429 and up to 10GigE Ethernet, with a capacity of 2TB to 8TB (or more) Memory Module. The AMDR-2003 is designed to accept Alphi's I/O boards as well as third party boards.
![]() Without Display: For High Channel Density Count |
SYSTEM CONFIGURATION |
![]() With Display: For Compact, Low Channel Density |
PHYSICAL SPECIFICATIONSRecorder Size: 13.5 in. (L) x 4.88 in. (W) x 6.0 in. (H) Recording Format: IRIG 106 Chapter 10 packet format PCM Input/output: 2 or 4 Channels of PCM/UART/PULSE Recording up to 32Mbps, 50 Ohm input impedance, TTL compatible, up to 32M bits per second Word Length: Programmable, 1 to 32 bit word length for each input, Generates and translates IRIG A, B and G time codes Analog Input / Output : 2 or 4 channels simultaneous single-ended analog input, Up to 50 MS/s per channel with 14-bit resolution, Input Range (±0.2V, ±1V) or (±1V, ±5V) software selectable, Input Impedance 50Ω, 75 Ω or 1 KΩ software selectable, 10 MHz analog input bandwidth, AC or DC Coupling options Video/ Audio Board: 2 channels, video, audio or both, NTSC or PAL, MPEG2 or MPEG4 RS232/RS422: 2 channels, Programmable from 112.5 to 921.6Kbaud Other Options: 3 x hot-swappable 3.5" HDD tray/carrier with SATA2 Drive Interface Gigabit Ethernet: 3 channels, Full Duplex Recorder Weight: Approx. 21.55 lbs, *varies by configuration ENVIRONMENTAL SPECIFICATIONSTemperature: -20°C to +75°C (operational) -40°C to +80°C (storage) Relative Humidity: 0 to 95%, non-cond. Vibration: As per MIL-STD-810F Salt Fog: As per MIL-STD-810F EMI/EMC: MIL-STD-461F Power: MIL-STD-704D STORAGE OPTIONS
SOFTWARE FEATURES
|
||
Ordering Information |
||
AMDR 2003-BP
Airborne Data Recorder with Baseband Video, PCM Recording Modules
AMDR 2003-PR
Airborne Data Recorder with PCM, RS422 Recording Modules
AMDR 2003-RB
Airborne Data Recorder with RS422, Baseband Video Recording Modules
AMDR 2003-BPR
Airborne Data Recorder with Baseband Video, PCM , RS422 Recording Modules
|
The Model AMDR-2004 is an airborne multi-purpose recorder and replay system. The AMDR-2004 is capable of recording 4 channels simultaneous single-ended analog input 50 MS/s (or more) per channel, 4 Channels of PCM Input with up to 32Mbps per channel, 4 channels of MIL-STD-1553, 8 /16 channels of ARINC, 2 channels of AFDX and Video Recording. The recorder also offers a wide array of other I/O options for recording. viz., HD video, ARINC 429, PCM, Wideband Analog, UART, Pulse and up to 10GigE Ethernet, with a capacity of 2TB to 8TB Memory Module. The STR-2003 is designed to accept Alphi's I/O boards as well as third party boards.
![]() Without Display: For High Channel Density Count |
SYSTEM CONFIGURATION |
![]() With Display: For Compact, Low Channel Density |
PHYSICAL SPECIFICATIONSRecorder Size: 13.5 in. (L) x 4.88 in. (W) x 6.0 in. (H) IRIG 106 Chapter 10 packet format Analog I/O: 2 or 4 channels simultaneous single-ended Baseband analog input, Up to 50 MS/s per channel; 14-bits, Input Range (±0.2V, ±1V) or (±1V, ±5V) software selectable; Input Impedance 50Ω, 75 Ω or 1 KΩ software selectable; 10 MHz analog input bandwidth; AC or DC Coupling options Video/ Audio 2 channels, video, audio or both, NTSC or PAL, MPEG2 or MPEG4 MIL STD 1553: 4 dual redundant MIL-STD-1553B buses; Transformer coupled Electrical Interface; Complete bus with time stamping for all messages recording method ARINC 429: 8/16 number of Channels; 12.5 Kbps (Low speed mode) selectable/auto bit rate 100 Kbps (high speed mode) selectable/auto bit rate; Time stamping for all messages ARINC 717: One Receive ARINC717 channel Operates from a single +3.3V supply; Selectable Harvard Bi-Phase (HBP) or Bi-Polar Return-to-Zero (BPRZ) receive channel; One selectable receive channel as HBP or BPRZ with integrated analog line receiver; 32-word by 12-bit FIFOs for receive channel AFDX: Two IEEE 802.3u (100BaseTX) standard compatible Ethernet interfaces; Single dual redundant A664P7 compatible interface; Filters redundant frames received within a 5ms window on the two A664P7 links; outputs exact copies of the non-redundant frames on the two output Ethernet interfaces; Valid frame counters, error frame counters, and discarded redundant frame counters; Supports up to 512 virtual links; Fixed latency through module Weight: Approx. 21.55 lbs, *varies by configuration ENVIRONMENTAL SPECIFICATIONSTemperature: -20°C to +75°C (operational) -40°C to +80°C (storage) Relative Humidity: 0 to 95%, non-cond. Vibration: As per MIL-STD-810F Salt Fog: As per MIL-STD-810F EMI/EMC: MIL-STD-461F Power: MIL-STD-704D STORAGE OPTIONS
SOFTWARE FEATURES
|
||
Ordering Information |
||
AMDR 2004-AP
Airborne Data Recorder with ADC, PAL/NTSC Video Recording Modules
AMDR 2004-P1
Airborne Data Recorder with PAL/NTSC Video,1553 Recording Modules
AMDR 2004-1A
Airborne Data Recorder with 1553, ADC Recording Modules
AMDR 2004-AP1X
Airborne Data Recorder with ADC, PAL/NTSC Video,1553, AFDX Recording Modules
|
The Model AMDR-2005 is a multi-purpose recorder designed for airborne applications. The AMDR-2005 is a high speed LVDS Recorder capable of recording up to 20Gbps per channel and with sustained throughput rates of up to 3.6GB/sec to external RAID array / SSD. The Recorder also offers a wide array of other I/O options for recording: HD video, Standard video, MIL-STD-1553, ARINC 429, PCM, Wideband Analog, UART, up to 10GigE Ethernet, with a capacity of up to 24TB SSD/HDD Memory Module. The AMDR-2005 is designed to accept Alphi's I/O boards as well as third party boards. The design allows the user to custom design the recorder for any mission requirement by reconfiguring the removable boards, adding and or subtracting channels as needed.
![]() Without Display: For High Channel Density Count |
SYSTEM CONFIGURATION |
![]() With Display: For Compact, Low Channel Density |
PHYSICAL SPECIFICATIONSRecorder Size: 8.90 in. (L) x 4.88 in. (W) x 3.61 in. (H) Storage: 2.5-inch SATAIII SSD 4 TB Storage capacity configured; [expandable] GBE: 1 / 10 Gbps, 4/8 Channels 10/100/1000Base-T Ethernet Interface UDP/IP, Minimum 4 ports support, Support for Multicast & broadcast Recording Format: IRIG 106 Chapter 10 packet format Processor: Intel® Core™ i7, Quad-Core Processor Input/output: High Speed Inputs available. Can be extended to any combination of Analog Standard Definition Video w/ Audio, Digital High Definition (SDI) Video w/ Audio, MIL-STD-1553, PCM, LVDS, ARINC 429 High speed LVDS Input: High speed LVDS Recording ,32 bits of LVDS digital I/O, One LVDS clock, One LVDS data valid, One LVDS data suspend, PCI Express Interface, Up to 2 GB of DDR3 SDRAM, Recorder Weight: Approx. 21.55 lbs, varies by configuration ENVIRONMENTAL SPECIFICATIONSTemperature: -20°C to +75°C (operational) -40°C to +80°C (storage) Relative Humidity: 0 to 95%, non-cond. Vibration: As per MIL-STD-810F Salt Fog: As per MIL-STD-810F EMI/EMC: MIL-STD-461F STORAGE OPTIONS
SOFTWARE FEATURES
|
||
Ordering Information |
||
AMDR_2005_xTB
x1, 2, 4, 8 TB
|
Whether working in adverse weather, wet conditions, underground or where space restrictions would usually hamper productivity, the rugged debriefing station ensures high system availability.
Soft Front Panel tool is also included, which is a convenient way to quickly setup the hardware of your module and start a measurement The Software GUI provides the user with a control interface for the recording system. GUI includes Configuration, Record, Playback and Status screens.
Recorder Software queries the Hardware and shows available IO module and each channel configuration. After configuration, settings can be downloaded onto the Hardware. Start and stop options will be given to start/stop the recording data. Recorder files will be displayed in the table by clicking Refresh option. Data will be recorded and downloaded into the specific folder. Download path can be selected using the Browse option. Recorder Raw data can be exported into specific formats (Decimal, Hex, Binary…etc). Output file of Exported data file size can be selected manually.
Analog and Mixed-signal analysis software and instrument drivers are provided with our instruments and modules, and also customize to create user specific software, with the emphasis on signal processing and analysis.
Analysis includes a virtual oscilloscope and spectrum analyzer for signal monitoring in both the time and frequency domains. It is useful for previewing live inputs prior to recording, and for monitoring signals as they are being recorded to help ensure successful recording sessions. It can also be used to inspect and analyze the recorded files after the recording is complete.
Advanced signal analysis capabilities include automatic calculators for signal amplitude and frequency, second and third harmonic components, FFTs, Computed channels, time and frequency zoom, panning modes and dual, annotated cursors to mark and measure points of interest. With the advanced and customizable software interface, the System-Flow Signal Viewer the need for a separate oscilloscope or spectrum analyzer in the field can beeliminated.